01604 662049 lifts@stertil.co.uk

Another repeat order for Stertil-Koni's heavy-duty 2-Post vehicle lift

27/07/23 | 2023

Following their purchase of two Stertil-Koni 5.5t Freedomlift® 2-post lifts back in 2018, Peterhead-based Finnie 4x4 Centre have purchased a third unit to assist with the service and repair of a wide range of pick-ups, adapted body off-roaders and 4x4 vehicles.


Stertil-Koni’s FREEDOMLIFT range comprises of three standard models offering capacities from 5.5 to 9 tonnes. Each model incorporates a pair of telescopic lifting arms which are easily adjusted, locked and unlocked as required. Also, depending on the needs of the user, a number of options are available including double telescopic arms for extra flexibility, additional control boxes, LED lighting and special vehicle adapters.


The Freedomlift’s ultra-modern design has resulted in an exceptionally stable 2-post lift that operates smoothly and safely with no bulky base or overhead load-bearing cross-bar. This ensures suitability for use in almost any environment whilst allowing engineers unrestricted access to raised vehicles during repair, maintenance and servicing tasks. Also, one of the main advantages of the 2-post lift over 4-post alternatives and mobile column lifts is that users achieve an instant wheel-free situation without relying on jacking beams or axle stands.

Complete user confidence is assured by a range of safety features including an independent locking system that engages at 210mm above floor level, a gravity-activated locking pawl, automatic locking of the lifting arms, advanced synchronisation between the posts and a fail-safe automatic overload protection system. These devices are complemented by an automatic maximum height limiter, hold-to-run control panel buttons, an emergency stop on the control panel plus special shielding for critical components such as hydraulic lines and electrical cables.

The Freedomlift’s hydraulic system has a minimum of moving parts and has been tested with more than 20,000 lifting and lowering cycles at maximum lifting capacity. All models are CE certified and covered by Stertil-Koni’s comprehensive 12 months parts and labour guarantee.

WEBSITE LINK: www.finnie4x4.com